PRODUCTS

Application

Used for welding similar composition of stainless steel and carbon steel and stainless steel dissimilar materials welding, petrochemical industry such as reaction vessel inner wall welding transition metal, or applied to poor toughness of martensitic, ferritic stainless steel welding.

Characteristics

The welding wire is a 24% Cr-13% Ni stainless steel welding wire, the weld metal has excellent high temperature resistance and corrosion resistance,perfect welding performance ,stable arc ,beautiful appearance.All position is suitable.

Chemical composition of welding wire: (Mass fraction)%

Mechanical Properties of Deposited Metal

Note

For MIG welding, the shielding gas flow rate should be maintained at 18-25 L/min using Ar+2%O2 mixture. Wind shields must be employed when wind speed exceeds 0.5 m/s.

For TIG welding:

Gas flow rate should be 5-14 L/min at welding currents between 15-200 A Gas flow rate should be 14-24 L/min at welding currents between 200-320 A

Pure argon must be used as shielding gas. Wind shields are required when wind speed exceeds 1.0 m/s.

Pre-welding requirement: Both MIG and TIG welding processes require thorough removal of rust, oil, moisture and other contaminants from workpieces.

Note: The above parameters serve as reference only. Users shall establish suitable welding procedures based on specific production conditions.